Buy BPC-157 + TB-500 40 mg Pen in South Africa
A repair-and-recovery blend of BPC-157 and TB-500 in a single 40 mg click pen. Each click delivers 133 µg from a 3 mL · 300-click pen.
Featured in these stacks: Recovery Stack.
how many clicks
for your dose?
This BPC-157 + TB-500 40 pen holds 40 mg across 300 clicks, so each click delivers 133 µg. Tap a dose or turn the dial; we'll count the clicks. For research reference only.
why researchers chose this pen
chose it for the click dosing, no syringes, no unit maths.
verified purity, checked against the public CoA before first use.
precise clicks in every 3 mL pen, the whole protocol in one barrel.
re-order or refer a colleague within three months.
about the
BPC-157 + TB-500 40 pen
A combined repair pen pairing BPC-157 with TB-500, supplied in a 3 mL / 300-click pen for tissue-repair research.
Certificate of analysiswhy a pen beats
a vial & syringe
Traditional research peptides arrive as lyophilised powder that must be reconstituted, drawn into insulin syringes, and converted from milligrams to units by hand, every step a chance for a dosing error.
A multi-dose pen removes the whole failure chain. The peptide arrives already dissolved and calibrated. Attach a fresh needle, turn the dial until you count your clicks, and you're done, the same audible-click mechanism trusted in insulin and GLP-1 pens worldwide.
Pens travel and store better, too: no open vials, no bent needles, no septum contamination after repeated draws. One sealed barrel, ten sterile needles, one dosing card.
how to buy
peptides safely
The peptide market has a purity problem: independent surveys routinely find underdosed, mislabelled or contaminated product sold online. The only reliable defence is third-party verification you can check yourself, not a supplier's own claims.
Before buying any peptide pen, ask three questions. Is every batch tested by an independent lab? Is the certificate of analysis available, so you can check your exact lot before first use? And does it ship cold-chain, insulated and gel-packed, so what was tested is what arrives?
Veyvora answers yes on every order, independent assay, a CoA on request against the batch number, and cold dispatch within 24 hours, paperwork packed inside.
pairs well with
view all
Overview
Veyvora’s BPC-157 + TB-500 40 mg research pen is a pre-filled, multi-dose peptide dosing pen combining both peptides in a single 3 mL, 300-click format, delivering approximately 133 µg per click, supplied for in-vitro laboratory research and dispatched cold to South Africa[1].
| Specification | Detail |
|---|---|
| Peptides | BPC-157 + TB-500 (combined blend) |
| Total fill | 40 mg |
| Volume | 3 mL |
| Clicks per pen | 300 |
| Delivery per click | ~133 µg |
| Format | Pre-filled multi-dose pen |
| Use classification | Research use only |
| Purchase detail | Status |
|---|---|
| Price | Contact Veyvora to confirm current ZAR pricing |
| Availability | Verify live stock at veyvora.com |
| Currency accepted | ZAR |
| Add to basket | Via product page |
Each order includes one 40 mg pen and ten 31G · 6 mm pen needles. A certificate of analysis is available on request against the lot number printed on the barrel.
Product Identity and Scope
This pen combines BPC-157 and TB-500 in a single 3 mL, 300-click pre-filled format, delivering approximately 133 µg per click from a 40 mg total peptide fill, supplied for in-vitro laboratory research and dispatched cold to South Africa[1].
Veyvora sells the pen as a combined blend. The public product page does not disclose the individual ratio of BPC-157 to TB-500 within the 40 mg total fill, so the composition is described here as a two-component blend; the batch documentation states the lot’s content. Researchers wanting to review the separate mechanistic profiles of each compound before committing to the combined format can compare BPC-157 and TB-500 to review the distinct evidence bases for each peptide.
Veyvora places the pen within its Repair & Recovery research pens category for tendon, gut, and tissue-repair research applications[1].
Verified Specifications
The pen is supplied in a 3 mL, 300-click multi-dose format, delivering approximately 133 µg per click from the 40 mg total peptide fill. Veyvora’s product page states these figures as of 30 August 2026.
| Specification | Verified value | Source |
|---|---|---|
| Total peptide fill | 40 mg | Veyvora product page, 2026 |
| Pen volume | 3 mL | Veyvora product page, 2026 |
| Clicks per pen | 300 | Veyvora product page, 2026 |
| Delivery per click | ~133 µg | Veyvora product page, 2026 |
| Needle gauge / length | 31G · 6 mm | Veyvora product page, 2026 |
| Needles included | 10 | Veyvora product page, 2026 |
| BPC-157 : TB-500 ratio | Not publicly disclosed | Request from operator |
| Individual peptide concentration | Not publicly disclosed | Request from operator |
| Stability threshold / shelf life | Not publicly disclosed | Request from operator |
| Price | Current ZAR figure on the product page | Request from operator |
The box contains one 40 mg multi-dose pen, ten 31G · 6 mm pen needles, and a dosing card. A certificate of analysis is available on request against the lot number printed on the barrel. The individual ratio of BPC-157 to TB-500 within the 40 mg fill is available from Veyvora on request rather than on the public product page. Researchers reading the purity figure can review what HPLC purity does and does not prove for how it is measured and reported.
Batch Documentation and Analytical Evidence
Veyvora states that every batch of the BPC-157 + TB-500 40 mg research pen is independently assayed, with a certificate of analysis (CoA) available on request against the lot number printed on the barrel. Batch testing covers purity and concentration by HPLC; a CoA can include mass spectrometry and endotoxin results for the specific lot, according to Veyvora’s product page and homepage FAQ[1]. The product page uses the phrase “verified twice”, indicating dual independent laboratory testing as a stated quality criterion.
Reading the Certificate of Analysis
HPLC purity figures report the proportion of the target peptide relative to detected impurities under the specific chromatographic conditions used; the ratio of BPC-157 to TB-500 within the 40 mg fill is available from Veyvora on request. Mass spectrometry confirms molecular identity, and the endotoxin assay reports the endotoxin level relevant to in-vitro work.
The full CoA for a given lot is supplied on request against the lot number printed on the barrel[1]; request it before committing material to a protocol. To cross-reference a received batch against Veyvora’s records, use the barrel lot number and follow the steps at verify your batch against the CoA.
Handling and Storage
Veyvora states that every BPC-157 + TB-500 40 mg research pen is dispatched cold, packed with an ice pack inside an insulated sleeve, and shipped in plain outer packaging, with dispatch typically within 24 hours of order confirmation across South Africa, the EU and UK[1]. The pre-filled, sealed pen format limits ambient exposure during transit compared with open-vial formats.
Storage temperature range, in-use stability period and shelf life for this pen are supplied with the batch-specific handling guidance rather than on the public product page[1]; request them alongside the certificate of analysis before committing the material to a protocol. The batch number printed on the barrel allows traceability when cold-chain integrity needs to be confirmed; storage and stability guidance covers the procedural steps for maintaining cold-chain integrity after delivery.
HPLC purity figures report the tested lot at the time of assay, which is why storage after receipt matters. What HPLC purity does and does not prove explains how the figure is measured and reported.
Ordering Information
As of 30 August 2026, Veyvora confirms that the BPC-157 + TB-500 40 mg research pen is available for dispatch to South Africa, with orders processed in ZAR[1]. Current ZAR pricing for this SKU is shown on the product page; confirm the figure directly with Veyvora before placing an order[1].
Each order includes one 40 mg multi-dose pen, ten 31G · 6 mm pen needles, and a dosing card, with a certificate of analysis available on request against the batch number printed on the barrel. Orders are dispatched within 24 hours of confirmation in cold-chain packaging, with plain outer packaging used throughout[1]. Support queries receive a response within one business day, as stated on the Veyvora homepage as of 30 August 2026[1].
Live stock levels, delivery fees, minimum order quantities and payment terms are confirmed at the point of purchase[1].
Buy the BPC-157 + TB-500 peptide dosing pen, add to basket or request distributor terms at veyvora.com.
Research Use
Veyvora supplies the BPC-157 + TB-500 40 mg research pen for in-vitro laboratory research, such as cell-culture and tissue-repair models and use as an analytical reference material[1]. Not for human or veterinary use. The 133 µg-per-click specification describes the pen’s dispensing format for laboratory work. For compound-level evidence, compare BPC-157 and TB-500 sets out the separate roles and current evidence base for each peptide.
Related Research and Comparison Pages
Veyvora places the BPC-157 + TB-500 40 mg research pen within a comparison-led site structure alongside adjacent formats such as Retatrutide 40, Tesamorelin 20, and NAD+ 1000, all sharing the same 3 mL / 300-click pen system[1]. The internal pages below extend the product record.
- Compare BPC-157 and TB-500, reviews the distinct analytical profiles and evidence bases for each peptide separately.
- What HPLC purity does and does not prove, explains how HPLC assay data are measured and reported, a complement to the batch CoA.
- Storage and stability guidance, covers 2–8 °C cold-chain requirements in detail beyond the dispatch specification stated on this page.
- Repair & Recovery research pens, lists comparable formats subject to the same batch-verification process[1].
To request a batch CoA for the BPC-157 + TB-500 40 mg pen, use the barrel batch number and contact Veyvora directly. The stated response time is one business day[1].
Sources
[1] Veyvora, research peptides, measured to the microgram, veyvora.com, https://veyvora.com/
